Although you can mount nearly any handheld router upside down in a router table, some are better suited to this line of duty than others. For example, many routers now sport built-in lift mechanisms that you crank to adjust bit heights from above the table, as shown above, without removing the router or reaching below the table. These routers typically require an extra hole in the insert plate to operate the lift mechanism. But beware: With some of these routers you still have to reach below the tabletop to lock the collet, negating half the benefit of a lift. If you already have a router you like and don’t want to upgrade, you might be able to get the same convenience by installing its motor in a router lift. You should also look for a router with variable speeds so you can slow it down for large-diameter bits. Another essential feature: electronic speed control, which maintains rpms when the routing gets tough. A 3-hp motor really hogs away material, but a midsize model (11⁄2 to 21⁄4 hp) will get you by if you take lighter cuts. When mounting any router in a table, position it so the variable-speed control will be easy to reach, because this cannot be controlled from above. Add an auxiliary power switch to avoid reaching under the table each time to power the router. Also, be careful to mount the router so any above-the-table adjustments won’t be covered by the fence during operation, because you might need to tweak a bit’s height with the fence in place.
View Image插件，支持查看谷歌图片及以图搜图1558 2019-12-24
Temporary Mobile View插件，Chrome移动视图，切换至网站iOS/Android/Kindle视图1439 2020-03-20
Volume Control插件，Chrome音量控制，最高增强至六倍2194 2020-08-13